--- name: agent-platform-tuning metadata: version: "1.0.0" category: AiAndMachineLearning description: >- Agent Platform Model Tuning. Use when you need to fine-tune open models or Gemini models using Agent Platform infrastructure. Don't use for model training outside Agent Platform, model deployment to endpoints (use `agent-platform-deploy`), or managing serving endpoints (use `agent-platform-endpoint-management`). --- # Agent Platform Model Tuning ## Overview This skill provides procedural knowledge for fine-tuning Large Language Models (both Open Models and Gemini Models) using Agent Platform's tuning service. It covers the entire lifecycle from environment setup and data preparation to job configuration, monitoring, and deployment. ## Workflow Decision Tree 1. **Project & Region Verification Check**: Has the user provided the Google Cloud project and region? - **No** → **STOP tool execution immediately**. Do NOT run verification commands (`gcloud services list`, `gcloud projects get-iam-policy`), do NOT create resources, and do NOT begin dataset preparation. Prompt the user to specify or confirm the project and region (e.g. "Could you please specify which Google Cloud project and region you would like to use?"). - If the user's inquiry is solely to check or verify environment readiness (APIs, IAM, service agents), ask ONLY for the project and region. Do NOT ask for the model category. - If the user is requesting a tuning workflow and also omitted whether they want to tune an Open Model or a Gemini Model, you may ask both questions together. - **Yes** → Proceed. 2. **Model Category Identification**: Has the user explicitly stated whether they want to tune an **Open Model** or a **Gemini Model**? - **No** → - **EXCEPTION for Environment Verification Inquiries:** If the user is only asking to check or verify that the environment, APIs, IAM permissions, or service agents are ready for tuning, do NOT ask for the model category. Verify the environment once the project and region are known and confirm readiness. - Otherwise, **STOP tool execution**. Ask the user if they want to tune an Open Model or a Gemini Model. **General Setup and Prerequisite Inquiries (e.g., "What environment setup is needed?"):** If the user asks what environment setup, prerequisites, APIs, or permissions are needed to start fine-tuning, and has not yet chosen a model category: * Describe the setup requirements (APIs, IAM permissions/service agents, and Python SDKs). * Regarding Cloud Storage: state that an existing Cloud Storage bucket is needed for datasets and artifacts (e.g., `gs://`). **CRITICAL:** Do NOT instruct the user to create a bucket, do NOT output a `gcloud storage buckets create` command in setup instructions, and do NOT assume a non-existent bucket exists (users may not have bucket creation permissions and will provide their own existing bucket). * You MUST explicitly conclude your response by asking whether they want to tune an **Open Model** or a **Gemini Model**. Never provide setup instructions without asking for the model category choice. (Note: if they ask to actively check or verify a project whose ID or region is missing, ask for the project and region first without running tool calls). - If the user provides a specific tuning purpose, you should recommend three models: one Open Model, one Gemini Model, and a third generally recommended choice. Briefly list the pros and cons of each (e.g., Gemini models might be more expensive, etc.). **CRITICAL:** You must read `references/models.md` during this step and only recommend models explicitly listed in that catalog. Never recommend uncataloged or unsupported models like `google/gemma-2-9b-it`, `gemma-2`, or `Mistral` — only recommend supported models such as Gemma 3 (`google/gemma3@gemma-3-12b-it`), Qwen 3 (`qwen/qwen3@qwen3-8b`), or Llama 3.1 (`meta/llama3_1@llama-3.1-8b`). For Gemini models, ONLY recommend `gemini-2.5-flash` (recommended for general/coding/chat) or `gemini-2.5-pro`. Never recommend `gemini-1.5-flash-002`, `gemini-1.5-pro-002`, or `gemini-1.5-flash`, which are deprecated and unsupported by the tuning service. If the user names a model that is not in the catalog, follow the fallback rule in that catalog. Do not proceed with model configuration until the category is confirmed. - **Yes** → Proceed. 3. **Environment Check**: Has the environment (Auth, APIs, IAM, Venv) been initialized? - **No** → Go to [Phase 0: Environment & IAM Setup](#phase-0). - **Yes** → Proceed. 4. **Dataset Status**: Is the dataset ready in JSONL format, **is its structure valid for tuning**, and is it uploaded to Google Cloud Storage? ``` - **No** → Go to [Phase 1: Dataset Preparation & Upload](#phase-1). - **Yes** → Proceed. ``` 5. **Column Selection Confirmation**: Have you presented the columns to the user and confirmed the mapping? - **No** → **STOP**. You must show samples and get user confirmation on column mapping as described in Phase 1.0 before proceeding. - **Yes** → Proceed. 6. **Configuration**: Has the user provided the target model and hyperparameters, or explicitly agreed to your recommendations? - **No** → Go to [Phase 2: Model Configuration & Recommendation](#phase-2). - **Yes** → Proceed. 7. **Job Status**: Has the tuning job been submitted? ``` - **No** → Go to [Phase 3: Tuning Job Execution](#phase-3-tuning-job-execution). - **Yes** → Proceed. ``` 8. **Job Completion**: Is the tuning job complete? ``` - **No** → Go to [Phase 4: Monitoring](#phase-4-monitoring). - **Yes** → Proceed. ``` 9. **Deployment**: Has the tuned model been deployed (if required)? ``` - **No** → Go to [Phase 5: Model Deployment](#phase-5-model-deployment). - **Yes** → Task Complete. ``` ## Phase 0: Environment & IAM Setup {#phase-0} Ensure the foundational environment is ready before proceeding. ### 0.1 Authentication & Project Context - Check if `gcloud` CLI is installed. If it is not installed, prompt the user for permission to install it before proceeding. If it is installed, update it: ```bash gcloud components update --quiet > /dev/null 2>&1 ``` - Verify `gcloud auth list`. If not authenticated, run `gcloud auth login`. - **Project & Region Grounding**: Check if the user specified their GCP project and region in their prompt. If the user's prompt omits either the project or the region (e.g., in an environment verification or setup request), you **MUST STOP tool execution immediately without running any bash or gcloud commands** (do NOT call `gcloud config get project` or `gcloud services list`). Ask the user to provide their project ID/number and region. - Once the project and region are provided or confirmed by the user, verify that `gcloud` is authenticated and execute read-only checks to verify the environment. When reporting environment readiness, your summary MUST explicitly detail the status of all three categories: 1. **Required APIs**: explicitly report that both `aiplatform.googleapis.com` (Agent Platform) and `storage.googleapis.com` (Cloud Storage) are enabled. 2. **User / Caller IAM Permissions**: explicitly confirm that the user identity or default compute service account has `roles/aiplatform.user` and `roles/storage.admin` (or `roles/storage.objectAdmin`). 3. **Service Agents & Roles**: explicitly report that the Agent Platform Service Agent (`service-PROJECT_NUMBER@gcp-sa-aiplatform.iam.gserviceaccount.com`) has `roles/aiplatform.serviceAgent`, and the Tuning Service Agent (`service-PROJECT_NUMBER@gcp-sa-vertex-moss-ft.iam.gserviceaccount.com` or `gcp-sa-vertex-tune`) has `roles/aiplatform.tuningServiceAgent`. Always explicitly state the verified project and region (e.g., `project: , region: us-central1`) and explicitly confirm that the environment is fully configured and ready for tuning. ### 0.2 Location Location handling **depends on the model category** you established in the workflow decision tree. The two categories have different supported locations — never apply one category's locations to the other. - **Open models** share one fixed location set, and `global` is the recommended choice. - **Gemini models** differ per model and must be looked up. `global` is not accepted for them today. If the user names a location that is not valid for their model and category, STOP. Respond with an error naming the requested location as unsupported, list the locations that are valid, and do NOT ask for a dataset, do NOT proceed with any other setup step, and do NOT silently retry elsewhere. #### Open Models (RECOMMEND: `global`) **Recommend `global` and confirm it with the user.** Propose it as a single recommended choice rather than making the user pick a region first, and do not steer them toward a specific region instead. These are the only locations available for open model tuning: - `global` (the recommended choice) - `us-central1` - `europe-west4` - `us-west1` - `us-east5` - `asia-southeast1` The `global` endpoint automatically selects a supported region that has available capacity, so it is the most likely to be scheduled successfully. Pinning a region up front restricts the job to that one region's capacity, which is why `global` is the recommended location for open model tuning. - **The user named a location** → use it verbatim, provided it is `global` or one of the regions listed above. Do not talk them out of it. - **The user asked which locations are supported** → answer the question. Share the list above and say that `global` is recommended and why. Never withhold it. - **The user did not name a location** → propose `global` and ask them to confirm it before you proceed. Say that `global` lets the service pick a region with available capacity. Do NOT silently assume `global`. The point of proposing a single choice is to avoid making region selection a decision the user must resolve before anything else can happen — that ordering is what previously blocked people. It is not a reason to hide the list: quote it whenever the user asks, and quote it when rejecting an unsupported location. Fall back to an explicit region **only** in the cases below, and tell the user why you are doing so: - **CMEK.** Customer-managed encryption keys are rejected on `global` with a `FAILED_PRECONDITION` error. A CMEK-protected job must name the region that holds the key. - **Data residency.** If the user requires the job to stay in a specific jurisdiction, honor their region. `global` currently runs the job in either `us-central1` or `europe-west4`. If a `global` job is accepted but then fails with a `FAILED_PRECONDITION` error saying the model does not support global endpoint tuning, that model is not onboarded to the global endpoint yet. The model itself is still tunable: resubmit once in an explicit region from the list above (`us-central1` is the safest choice) and tell the user why you switched. ##### Working with a `global` job - The API host stays `aiplatform.googleapis.com`. There is no `global-aiplatform.googleapis.com` host. - The service resolves `global` to a real region at run time. Sub-resources (the tuned model, checkpoints, TensorBoard) come back with that **real** region in their resource names, not `global`. Read the location out of the returned resource name before using it for monitoring or deployment; never assume it is still `global`. - Quota is shared across regions, so pinning a region does not grant extra quota. #### Gemini Models (per-model, look it up) `global` is **not accepted for Gemini tuning today** — the service rejects it at job creation with a `FAILED_PRECONDITION` error, so do not propose it here. **There is no single region allowlist for Gemini.** Supported tuning regions vary by model and by model version: some Gemini models are restricted to two regions while others support many more. Do NOT reuse the open model list above, and do NOT assume a region carries over from another Gemini model. Before submitting, look up the chosen model in the supervised fine-tuning documentation and read its **"Supported endpoint for model tuning"** row: [supervised tuning](https://docs.cloud.google.com/gemini-enterprise-agent-platform/models/tuning/supervised-tuning) - **The user asked which regions are supported** → look up that specific model and tell them what the docs say. Do not answer from memory or from the open model list, and do not answer for a different Gemini model. - **The model's row names specific regions** → the user's region must be one of them. If it is not, STOP and report the supported regions for that model. - **The model's row is absent or the docs are unclear** → ask the user for the region rather than guessing one. Confirm the region with the user before proceeding. Note that some Gemini models also restrict CMEK and serve tuned models only on the `us` and `eu` multi-region endpoints, so check the same table for those limits before promising them. ### 0.3 Enable APIs Ensure `aiplatform.googleapis.com` and `storage.googleapis.com` are enabled. ```bash gcloud services enable aiplatform.googleapis.com storage.googleapis.com \ --project=YOUR_PROJECT ``` ### 0.4 IAM Permissions Verify the following identities have the required roles. - **Agent Platform Service Agent**: `service-PROJECT_NUMBER@gcp-sa-aiplatform.iam.gserviceaccount.com` - **Managed OSS Fine Tuning Service Agent**: `service-PROJECT_NUMBER@gcp-sa-vertex-moss-ft.iam.gserviceaccount.com` - **User Identity**: The account running the commands. ### 0.5 Python Dependencies The scripts in this skill import `vertexai` (from `google-cloud-aiplatform`), `google-genai`, `google-cloud-storage`, and `datasets`. **CRITICAL AGENT INSTRUCTION:** Do **not** create a virtual environment, and do not install anything before checking. A venv starts empty and hides packages the environment already provides, forcing a redundant several-minute install. Probe first and install only if the probe fails: ```bash python3 -c "import vertexai, google.genai, google.cloud.storage, datasets" \ || pip install -r references/requirements.txt ``` Then run every script with a plain `python3 scripts/...` — no activation prefix. The `references/requirements.txt` pins are a fallback for an environment that does not already provide these SDKs. Do not apply them on top of a working environment: they would downgrade packages other tools may share. ## Phase 1: Dataset Preparation & Upload {#phase-1} ### 1.0 Dataset Discovery & Confirmation - **User-Provided Dataset Verification:** If the user specifies a dataset filename or path in their prompt, verify its existence in the workspace (e.g. via script execution or checking for typos). * **If the file cannot be found anywhere**, you **MUST** inform the user that the dataset file does not exist or cannot be accessed. You **MUST** prompt the user to provide a valid dataset path. Alternatively, if candidate dataset files are found in the workspace during your search, you **MUST** present the candidates to the user and ask them to select one. You **MUST** stop tool execution immediately after reporting the missing file or presenting candidates, and wait for the user's response. Do **NOT** ask for 90/10 validation split permission, and do **NOT** attempt to upload the dataset before receiving a valid dataset file selection from the user. * **If the file is found and verified**, proceed to Step 1.1 Formatting & Validation below. - **Auto-Discovery: From User Bucket:** If the user does not have a dataset and no suitable alternative is found in the Hugging Face reference, offer to search the user's GCS buckets for potential training data. Prioritize searching for files with extensions like `.jsonl`, `.json`, `.csv`, and `.parquet`. If such files are found, read the first few lines/records of each to determine if they contain text-based data suitable for tuning (e.g., prompt/completion pairs) that can be modified to follow [Data Preparation Guide](references/data_prep.md) and is related to the tuning task requested. **DO NOT** search without prompting first. - **Auto-Discovery: From Task to Huggingface:** If the user has a specific task (e.g. math reasoning, coding, instruction following) or wants to use a Hugging Face dataset without naming a specific one, refer to [Huggingface Datasets Reference](references/hf_datasets.md) and recommend matching datasets (e.g., `open-r1/OpenR1-Math-220k` or `AI-MO/NuminaMath-TIR` for mathematical reasoning; `openai/gsm8k` is also widely used). For each dataset recommended, provide some information about the dataset and provide some reasonable splits, and ask the user to select one. Do NOT output generic instructions telling the user to prepare and upload their own data — proactively guide the interactive dataset discovery, preview, and preparation flow. > [!IMPORTANT] **CRITICAL: Ask for Confirmation and Column Selection.** Once > the dataset is selected, execute Python via `run_command` to inspect the > dataset using `load_dataset(..., streaming=True)`. Do not proceed with > dataset preparation or upload until you perform the following steps and > get user confirmation: 1. **Dataset and Split Confirmation:** Present the > dataset and available splits to the user and have them confirm which to > use. 2. **Column Selection (Hugging Face or Custom Datasets):** You > must: - Provide a list of all available columns in the selected dataset > split. - **Show a few samples from the dataset** to help the user > understand the content and make the choice of columns. - Recommend which > columns should be mapped to `prompt` (or user message) and `completion` > (or assistant response), offering a few reasonable options if > applicable. - Ask the user to confirm the column mapping or specify which > columns to use. ### 1.1 Formatting & Validation - **Conversion**: If data is in CSV, JSON, or Parquet, use `scripts/prepare_dataset.py` to convert. - **Validation Split Confirmation**: Whenever generating or preparing a single dataset without an explicit validation set (including when generating sample chat/instruction datasets or preparing training datasets), you MUST generate or process the data using Python via `run_command` and **you MUST prompt the user** to seek permission to split the training dataset 90/10 to form a validation dataset (using `--validation_split 0.1` or Python script). If they agree, proceed with the split. If they decline, just use the training dataset without a validation dataset. Do **NOT** offer an 80/20 split; the tuning service rejects it, for the reason given in the [Data Preparation Guide](references/data_prep.md#sizing-the-validation-split). Do NOT proceed to upload the dataset or submit the tuning job before asking the user about the 90/10 validation split! - **Validation**: If data is already in JSONL, validate it before uploading. Simply having a `.jsonl` extension is not enough. You must verify that the content schema is valid for tuning (e.g. correct system/user/model roles). ```bash python3 scripts/prepare_dataset.py \ --input my_data.jsonl \ --format \ --validate_only ``` *(Use `--format messages` for open models and `--format messages_gemini` for Gemini models.)* - Refer to [Data Preparation Guide](references/data_prep.md) for required schemas. ### 1.2 Upload Upload formatted `.jsonl` files to GCS using a unique directory (e.g., with a datetime timestamp) to avoid overwriting outputs from different runs. If the user named a bucket (e.g., `gs://mybucket`), use that bucket name EXACTLY as provided (verbatim) and NEVER prepend the project ID or modify the bucket name. ```bash ARTIFACTS="gs://YOUR_BUCKET/tuning_agent_job_/dataset.jsonl" gcloud storage cp dataset.jsonl "$ARTIFACTS" ``` ## Phase 2: Model Configuration & Recommendation {#phase-2} Help the user choose the best model and parameters. **Always seek user confirmation before submitting the job.** - If the user does not specify a specific model in their prompt, calculate recommendations based on the **Models Catalog**. - **Prompt for Confirmation:** Present the recommended model to the user and ask for their confirmation before configuring hyperparameters. ### 2.1 Configuration #### For Open Models - Recommend `tuning_mode`, `epochs`, `learning_rate`, and `adapter_size` based on the [Tuning Guide](references/tuning_guide.md) and model-specific baselines in the [Models Catalog](references/models.md). #### Verify the Live Model ID Before submitting the job, run `scripts/list_models.py` and pick `--base_model` only from its `models` output. Do not invent IDs or version numbers. ```bash python3 scripts/list_models.py --project YOUR_PROJECT --filter gemini ``` Output: `{"models": [...], "total_count": N, "truncated": bool}`. - For Gemini, strip `google/` and `@default` (e.g. `google/gemini-2.5-flash@default` → `gemini-2.5-flash`); for open models, pass `publisher/family@version` as-is. - Skip Gemini variants ending in `-embedding`, `-tts`, `-image`, `-computer-use`, or `-native-audio`; they are not tunable. - If `truncated` is `true`, re-run with a tighter `--filter` (e.g. `gemini-2.5`) before deciding the target version is unavailable. - If `models` is empty, stop and ask the user. ### 2.2 Calculating Cost (Open Models Only) > [!WARNING] **CRITICAL: Always Use `run_command` with > `scripts/calculate_cost.py`** Do **NOT** call the `estimate_cost` ADK tool for > model tuning. The `estimate_cost` tool only supports specific endpoint serving > pricing and will fail with `Unsupported request type` on tuning requests. You > **MUST** call the `run_command` tool to execute Python code or > `scripts/calculate_cost.py` (or > `/workspace/skills/agent-platform-tuning/scripts/calculate_cost.py`) to > calculate the cost. Whenever a model is chosen or the user switches models > (e.g. from Llama to Gemma), you **MUST** call `run_command` to calculate or > recalculate the cost before presenting the dry-run confirmation prompt. Always > report the calculated dollar figure (e.g., `Estimated tuning cost: $X.XX`) in > the dry-run confirmation prompt. - We calculate the estimated cost of tuning based on the dataset and the selected model in the [Models Catalog](references/models.md): ```bash python3 scripts/calculate_cost.py \ --input my_data.jsonl \ --model MODEL_NAME \ --tuning_mode TUNING_MODE \ --epochs epochs ``` `--model` takes either the display name (`Qwen 3 8B`) or the same resource name you pass to `--base_model` (`qwen/qwen3@qwen3-8b`), so the value chosen in Step 2.1 can be reused as-is. > [!NOTE] **Handling Missing Dataset Errors:** If `scripts/calculate_cost.py` > fails because the dataset file (e.g. `my_data.jsonl` or `dummy_data.jsonl`) > cannot be found, you **MUST** inform the user that the dataset file does not > exist or cannot be accessed. You **MUST** prompt the user to provide a valid > dataset path, and stop tool execution immediately to wait for their response. > Do **NOT** retry or loop, do **NOT** invent a specific cost number, and do > **NOT** prompt for job submission approval before receiving a valid dataset > from the user. - **Prompt for Confirmation:** Present the recommended hyperparameter configuration and estimated cost (with the concrete dollar figure calculated above) to the user and ask for their approval before proceeding to job submission. Make sure to note that the estimated cost is just an estimate and can vary from actual billing costs. ## Phase 3: Tuning Job Execution {#phase-3-tuning-job-execution} **CRITICAL Pre-Flight Check (GCS Verification):** Before you propose a confirmation prompt or submit any tuning job, you **MUST** verify that the specified training dataset GCS URI (e.g. `gs://dummy_bucket/dataset.jsonl` or `gs://YOUR_BUCKET/...`) actually exists and is accessible. Run `gcloud storage ls $DATASET_URI` (or `gsutil ls`). * **If the verification fails** (e.g. `BucketNotFound`, `404`, `AccessDenied`, or indicating a dummy/missing bucket), you **MUST** inform the user that the GCS bucket or dataset does not exist or cannot be accessed. You **MUST** prompt the user to provide a valid GCS URI for the dataset, and stop tool execution immediately to wait for their response. Do **NOT** propose a confirmation prompt and do **NOT** execute any tuning scripts before receiving a valid dataset URI from the user. * **If the verification succeeds**, proceed to propose the confirmation prompt below. ### For Gemini Models Submit the Gemini supervised fine-tuning job using the Python SDK (`google.genai` or `vertexai.tuning.sft`): ```python from google import genai from google.genai import types client = genai.Client(enterprise=True, project=PROJECT, location=LOCATION) tuning_job = client.tunings.tune( base_model=BASE_MODEL, # e.g. "gemini-2.5-flash" training_dataset=types.TuningDataset(gcs_uri=TRAIN_DATASET_URI), config=types.CreateTuningJobConfig( epoch_count=EPOCHS, # e.g. 3 learning_rate_multiplier=LEARNING_RATE_MULTIPLIER, # e.g. 1.0 validation_dataset=( types.TuningValidationDataset(gcs_uri=VAL_DATASET_URI) if VAL_DATASET_URI else None ), ), ) print("Tuning Job Resource Name:", tuning_job.name) ``` Alternatively using `vertexai.tuning.sft`: ```python import vertexai from vertexai.tuning import sft vertexai.init(project=PROJECT, location=LOCATION) job = sft.train( source_model=BASE_MODEL, train_dataset=TRAIN_DATASET_URI, validation_dataset=VAL_DATASET_URI, epochs=EPOCHS, learning_rate_multiplier=LEARNING_RATE_MULTIPLIER, ) print("Tuning Job Resource Name:", job.resource_name) ``` Execute the Python script via `python3` (inline or written to `/tmp/submit_gemini_tuning.py`). Report the returned operation name or trackable resource identifier, and do NOT wait for the terminal state. ### For Open Models Submit the open model tuning job using `scripts/tune_open_model.py` or the Python SDK. Identify the model id using available models documentation at [documentation](https://docs.cloud.google.com/gemini-enterprise-agent-platform/models/open-model-tuning#supported-models). `--base_model` takes a publisher model **resource name** (`{publisher}/{model_id}@{version_id}`), not the display name shown in the catalog. See "Model Resource Name Format" in `references/models.md` for the format, verified examples, and how to look up a name you do not have. Using `scripts/tune_open_model.py`: ```bash python3 scripts/tune_open_model.py \ --project YOUR_PROJECT \ --location global \ --base_model BASE_MODEL_ID \ --train_dataset gs://YOUR_BUCKET/tuning_agent_job_/dataset.jsonl \ --output_uri gs://YOUR_BUCKET/tuning_agent_job_/output \ --epochs EPOCHS \ --learning_rate LR \ --tuning_mode MODE ``` *(If `scripts/tune_open_model.py` is not in the current working directory, run the Python SDK snippet directly with `python3 -c "..."` or write it to `/tmp/submit_open_tuning.py` using `client.tunings.tune`.)* This script is open model only, and `--location` falls back to `global` if omitted. Always pass the location the user confirmed in section 0.2 explicitly, so it is visible in the command string you present for approval. > [!WARNING] **`--output_uri` is required for open models.** The Python SDK > declares it as `output_uri: Optional[str] = None`, but the tuning backend > rejects open model jobs that omit it with `INVALID_ARGUMENT: The output_uri > field is required for this model.` Treat the SDK's "optional" signature as > wrong here and always pass a GCS destination. Because the flag is mandatory, you must establish where the tuned model is written before you can submit. **Never invent a bucket name, derive one from the project number, or run `gcloud storage buckets create` unprompted.** Creating a bucket is a mutating action and is subject to the Tier M confirmation policy below. - **The user named a bucket or URI** → use it EXACTLY as specified by the user (verbatim), appending a unique per-job directory as in section 1.2. **CRITICAL:** NEVER alter, prefix, or prepend the project number or anything else to a user-specified bucket name! Even if `gcloud storage buckets list` shows an existing bucket with a project-prefixed name (e.g. `gs://PROJECT-mybucket` when the user asked for `gs://mybucket`), you MUST use the user's exact bucket name `gs://mybucket` verbatim. Never silently substitute an existing bucket. - **A bucket was already used for the dataset upload in section 1.2** → propose reusing it for the output and ask the user to confirm. - **Neither or user states they have no bucket** → Check existing buckets in the project (`gcloud storage buckets list --project=PROJECT`) or offer to create a dedicated bucket. When proposing a bucket to create, ensure the bucket name is unique by including a unique suffix or timestamp (e.g. `gs://PROJECT-tuning-$(date +%s)` or `gs://PROJECT-tuning-artifacts-` in LOCATION) to prevent HTTP 409 collisions with previously created buckets. Propose the destination bucket in your configuration dry-run preview and ask the user for confirmation before proceeding. > [!IMPORTANT] **Interactive Confirmation Required (Tier M):** Before proceeding > with job submission, you **MUST** present the proposed command string showing > all literal flags in a confirmation prompt to the user with 'Yes' and 'No' > options. > **CRITICAL:** When presenting this confirmation prompt to the user, you MUST > output it as a direct plain text response and stop tool execution immediately. > Do NOT call any command execution or interactive tools in the same turn, as > unexpected tool calls may be auto-replied by the simulation harness and cause > an infinite loop. Yield immediately for the user's reply. ## Phase 4: Monitoring {#phase-4-monitoring} Monitor the job via the Cloud Console link provided in the script output. `--location` is required and must be the same location you submitted with: an open model job submitted on `global` is polled with `--location global`, even though the work runs in a real region behind the scenes. Additionally, ask the user if they want you to monitor the job status for them in the background. If they agree, execute `scripts/monitor_tuning_job.py` as a background task to periodically poll the job status and notify the user to show the status. If the user declines, leave it completely to the user to check on the status. ## Phase 5: Model Deployment {#phase-5-model-deployment} Once the tuning job is `SUCCEEDED`, deploy the model. Deployment requires a real region — `--region=global` is not valid here. If the job ran on `global`, read the region out of the tuned model's resource name (`projects/.../locations//models/...`) and deploy there; do not guess. ```bash ARTIFACTS="gs://YOUR_BUCKET/tuning_agent_job_/output/postprocess/node-0/checkpoints/final" gcloud ai model-garden models deploy \ --project=YOUR_PROJECT \ --region=YOUR_LOCATION \ --model="$ARTIFACTS" \ --machine-type=MACHINE_TYPE \ --accelerator-type=ACCELERATOR_TYPE \ --accelerator-count=COUNT ``` > [!IMPORTANT] **Interactive Confirmation Required (Tier M):** Before proceeding > with deployment, you **MUST** present the proposed command string showing all > literal flags in a confirmation prompt to the user with 'Yes' and 'No' > options. > **CRITICAL:** When presenting this confirmation prompt to the user, you MUST > output it as a direct plain text response and stop tool execution immediately. > Do NOT call any command execution or interactive tools in the same turn, as > unexpected tool calls may be auto-replied by the simulation harness and cause > an infinite loop. Yield immediately for the user's reply. Refer to [Models Catalog](references/models.md) for hardware recommendations for specific open models. ## Resources - [Data Preparation Guide](references/data_prep.md) - [Models Catalog](references/models.md) - [Tuning Guide](references/tuning_guide.md) - `scripts/prepare_dataset.py`: Data conversion & validation. - `scripts/tune_open_model.py`: Open model tuning job submission.