---
name: 3d-essentials
description: Use when working with 3D-specific systems — materials, lighting, shadows, environment, global illumination, fog, LOD, occlusion culling, and decals in Godot 4.3+
title: 3d-essentials
canonical_url: https://skilld.dev/gh/jame581/godotprompter/3d-essentials
last_updated: 2026-11-13T22:06:02.000Z
---

> Index of every page on this site: [llms.txt](https://skilld.dev/llms.txt)

> **Skill from skilld.dev.** Follow the user's requested action.
> If the user asked to fork this Skill, follow the fork workflow below. Do not execute the Skill instructions while copying it.
> Otherwise, follow the instructions below for this session. You do not need to install anything.
>
> Supporting files, fetch one when the Skill refers to it: [references/common-pitfalls.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/common-pitfalls.md), [references/decals.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/decals.md), [references/environment-and-post.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/environment-and-post.md), [references/fog-recipes.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/fog-recipes.md), [references/global-illumination.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/global-illumination.md), [references/godot-4.7-additions.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/godot-4.7-additions.md), [references/lod-and-culling.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/lod-and-culling.md), [references/materials-and-lighting-recipes.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/materials-and-lighting-recipes.md), [references/renderer-comparison.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/renderer-comparison.md).
>
> If the user asked to install this Skill, run `npx skilld install jame581/godotprompter/3d-essentials`. Install writes the Skill files into the project, so every session loads them.
>
> ## Fork workflow
>
> A fork creates an editable local Skill with its original author and licence. The request authorizes copying and local installation.
> 1. Check `./skills/3d-essentials`, the project lockfile, and selected Agent targets together. If the local directory or installed Skill exists, stop. Never overwrite an existing directory or Agent target.
> 2. Read [source metadata](https://skilld.dev/api/v1/skills/jame581/godotprompter/3d-essentials) once. Use sourceUrl, sourceCommit, skillPath, sourceGone, and license. If the source is gone or its path is missing, stop. If license is null, read licence files at the source commit.
> 3. Fetch only the source commit into a temporary Git repository. Do not clone full history. Derive repository_url from sourceUrl, including repository renames. If sourceCommit is absent, resolve the sourceUrl ref once. Set source_commit to that actual commit. Run these commands in one shell call:
>
> ```sh
> git init --quiet "$temporary_dir"
> git -C "$temporary_dir" fetch --quiet --depth=1 "$repository_url" "$source_commit"
> git -C "$temporary_dir" checkout --quiet --detach FETCH_HEAD
> ```
>
> Read applicable licence declarations and notices at that commit. If copying is not permitted, report the restriction and stop.
> 4. Inspect source entries together, then copy the directory containing skillPath into `./skills/3d-essentials`. Use the user's path if selected. Keep the original SKILL.md, relative links, scripts, binary assets, and executable modes. Exclude .git metadata. Reject symlinks and paths outside the Skill directory. After checking entries, use cp -a where available. A regular source directory needs no custom copy script. Do not save this page wrapper as SKILL.md.
> Preserve author credit, notices, and applicable licence files from repository or parent directories. Add PROVENANCE.md with the Skill page, source URL, actual commit, original path, and licence. Retain any existing PROVENANCE.md and record new provenance separately. Batch source inspection, copying, and provenance work where practical.
> 5. In the project root, run `skilld install ./skills/3d-essentials --mode copy --plain`. If skilld is unavailable, use `npx skilld install ./skills/3d-essentials --mode copy --plain`. This known command needs no help lookup. Install does not support --json. Use detected Agent targets, or add --agent for the targets the user selected. Install the local path, never the upstream selector. If installation fails, preserve the local copy and report the exact failure.
> 6. Confirm the local lockfile source and installed Agent copies once. Report the local path, actual commit, and Agent targets. After edits, reinstall the same local path. Upstream updates must not replace it. Do not publish or push unless the user asks.

# 3D Essentials in Godot 4.3+

All examples target Godot 4.3+ with no deprecated APIs. GDScript is shown first, then C#.

> **Related skills:** **rendering-pipeline** for renderer choice, lighting strategy, AA and resolution scaling, **player-controller** for CharacterBody3D movement, **physics-system** for 3D collision shapes and raycasting, **camera-system** for Camera3D follow and transitions, **shader-basics** for spatial shaders and post-processing, **godot-optimization** for 3D performance tuning, **animation-system** for AnimationTree and 3D animation blending.

---

## 1. 3D Coordinate System & Core Nodes

### Coordinate System

Godot uses a **right-handed** coordinate system with metric units (1 unit = 1 meter):

| Axis | Direction | Color |
|------|-----------|--------|
| X | Right | Red |
| Y | Up | Green |
| Z | Out of screen (+Z toward viewer) | Blue |

> Cameras and lights point along **-Z** by default. When a character "faces forward," they look along -Z.

### Essential 3D Nodes

| Node | Purpose |
|--------------------|-------------------------------------------------|
| `Node3D` | Base transform node — position, rotation, scale |
| `MeshInstance3D` | Displays a mesh with a material |
| `Camera3D` | Required to render 3D — perspective or orthogonal |
| `DirectionalLight3D` | Sun/moon — parallel rays, cheapest light |
| `OmniLight3D` | Point light — emits in all directions |
| `SpotLight3D` | Cone light — flashlights, spotlights |
| `WorldEnvironment` | Sky, fog, tonemap, post-processing |
| `Decal` | Projected texture onto surfaces |
| `GPUParticles3D` | GPU-driven particle effects |
| `CSGBox3D` etc. | Constructive Solid Geometry — prototyping |
| `GridMap` | 3D tile-based level building |

> **Godot 4.7+:** `GridMap` exposes its internal octants for spatial queries (`cell_octant_size`, `get_used_octants()`, `get_octants_in_bounds()` and friends) so you can scope work to a region instead of walking every cell. `CSGShape3D` gains `autosmooth` / `smoothing_angle` for automatic face smoothing. Full method table and semantics: [references/godot-4.7-additions.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/godot-4.7-additions.md)

### Minimal 3D Scene

```
World (Node3D)
├── Camera3D
├── DirectionalLight3D
├── WorldEnvironment
├── MeshInstance3D (floor)
└── MeshInstance3D (player model)
```

---

## 2. Materials

### StandardMaterial3D vs ShaderMaterial

| Material | Use For | Notes |
|----------------------|---------------------------------------------|--------------------------------|
| `StandardMaterial3D` | Most 3D objects — PBR workflow | No code; Inspector-driven |
| `ORMMaterial3D` | Same as Standard but with packed ORM texture | Occlusion+Roughness+Metallic in one texture |
| `ShaderMaterial` | Custom effects — toon, water, dissolve | Requires spatial shader code |

### Key StandardMaterial3D Properties

The PBR core: `albedo_color` / `albedo_texture` (base color), `metallic` (0 dielectric → 1 metal), `roughness` (0 mirror → 1 matte), `normal_texture` with `normal_enabled` (surface detail), `ao_texture` (ambient occlusion). Add `emission` + `emission_energy_multiplier` for self-illumination, `heightmap_texture` for parallax, `rim` / `clearcoat` for material flair.

### Transparency Modes

Prefer Alpha Scissor (fast, shadowed cutouts) or Alpha Hash (dithered — hair) over plain Alpha (slow, no shadows); Depth Pre-Pass suits mostly-opaque meshes with transparent edges.

> See [references/materials-and-lighting-recipes.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/materials-and-lighting-recipes.md#transparency-modes) for the comparison table.

### Setting Materials from Code & Material Instancing

Create a `StandardMaterial3D` at runtime, assign to `mesh.material_override`, and drive emissive flashes via Tween. Use `.duplicate()` to make per-instance copies so changing one mesh's material doesn't affect others.

> See [references/materials-and-lighting-recipes.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/materials-and-lighting-recipes.md) for the full GDScript and C# recipes (basic material setup, emissive flash, per-instance duplicate, dynamic OmniLight3D explosion).

---

## 3. Lighting

### Light Types Comparison

| Light | Shape | Shadows | Cost | Max Visible |
|---------------------|---------------|---------|---------|----------------------|
| `DirectionalLight3D` | Parallel rays | PSSM | Cheapest | 8 (Forward+) |
| `OmniLight3D` | Sphere | Cube/Dual Paraboloid | Medium | 512 clustered* |
| `SpotLight3D` | Cone | Single texture | Cheap | 512 clustered* |
| `AreaLight3D` (4.7+) | Rectangle | PCSS soft | Most expensive | — |

*Forward+ shares 512 clustered element slots among omni lights, spot lights, decals, and reflection probes.

### Light Properties

Key knobs: `light_color`, `light_energy` (HDR — values >1 are valid), `shadow_enabled` (big perf hit), `directional_shadow_mode`, `directional_shadow_max_distance` (lower = sharper shadows).

> See [references/materials-and-lighting-recipes.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/materials-and-lighting-recipes.md#light-properties) for the properties table and the GDScript + C# sun setup snippet.

### AreaLight3D (Godot 4.7+)

`AreaLight3D` emits light from a rectangle along the node's **-Z** (neon tubes, screens, softbox panels), with PCSS soft shadows driven by `light_size`. Mobile support is limited and Compatibility cannot cast area-light shadows; in Forward+ one visible area light adds clustered-lighting cost to *all* rendered objects, so reserve it for cinematics or high-end targets.

> See [references/materials-and-lighting-recipes.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/materials-and-lighting-recipes.md#arealight3d-godot-47) for the full property table and the GDScript + C# setup recipe.

### Dynamic Point Light

Spawn an `OmniLight3D` at runtime, drive its energy with a tween, queue-free on completion. Common for explosions, muzzle flashes, magic effects.

> See [references/materials-and-lighting-recipes.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/materials-and-lighting-recipes.md#dynamic-point-light) for the full GDScript and C# recipe.

### Shadow Configuration & Bake Modes

Prefer `shadow_normal_bias` over `shadow_bias` against acne; keep `directional_shadow_max_distance` at the minimum needed (50–100 m typical). Bake modes: Disabled (fully real-time, ignored by GI), Static (fully baked, no runtime cost), Dynamic (the default; indirect baked into lightmaps, direct real-time).

> See [references/materials-and-lighting-recipes.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/materials-and-lighting-recipes.md#shadow-configuration-tips) for the shadow-tuning table and the bake-modes table.

> **Godot 4.8+:** Screen-space contact shadows (Forward+ only; `rendering/lights_and_shadows/contact_shadow/enabled`, default `false`) add the small shadows shadow maps miss. Light properties and `LightmapGI.specular_intensity`: [references/materials-and-lighting-recipes.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/materials-and-lighting-recipes.md#contact-shadows-godot-48).

---

## 4. Environment & Post-Processing

Configure global rendering — sky background, tonemapping, glow, SSR, SSAO/SSIL/SDFGI, depth-of-field — through a `WorldEnvironment` node holding an `Environment` resource. Pick a tonemap (`Linear`, `Reinhard`, `Filmic`, `ACES`, or `AgX` from Godot 4.4) on the Environment resource. Forward+ enables SSAO, SSIL, SSR, and SDFGI; the Mobile renderer omits them, and Compatibility has only SSAO (since 4.6).

> See [references/environment-and-post.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/environment-and-post.md) for the full setup recipes (sky options, tonemap modes, all post-processing effects, the 4.6+ glow blend and default changes, AgX `tonemap_agx_white` / `tonemap_agx_contrast` controls, and the 4.6+ SSR quality upgrade).

> **Godot 4.7+:** `display/window/hdr/request_hdr_output` requests HDR display output (read at startup; toggle `Window.hdr_output_requested` at runtime). ⚠️ The `rendering/reflections/sky_reflections/roughness_layers` default is `8` again after `7` in 4.6.0–4.6.1. Details in [references/environment-and-post.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/environment-and-post.md#hdr-output-and-sky-reflection-layers-godot-47).

> **Changed in Godot 4.8:** New projects enable `rendering/lights_and_shadows/multi_bounce_occlusion/enabled` (Forward+ only; class default `false`), which approximates multi-bounce GI in ambient occlusion from albedo. SSAO and AO maps look different from an upgraded project.

## 5. Global Illumination

Five GI options trade quality for cost: none (ambient only) → ReflectionProbe (localized) → LightmapGI (best quality, baked) → VoxelGI (small/medium dynamic) → SDFGI (large open-world). VoxelGI and SDFGI require Forward+; LightmapGI plays on all three renderers but bakes only in a Forward+ or Mobile editor. The 4.5+ subsection below applies across GI methods.

> See [references/global-illumination.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/global-illumination.md) for the methods comparison table, ReflectionProbe scene + code recipe, LightmapGI bake workflow, and SDFGI configuration.

### Specular Occlusion & Bent Normal Maps (Godot 4.5+)

Since 4.5, indirect specular is dimmed by the ambient light reaching each pixel, in all renderers — on by default, no re-bake; disable globally with `rendering/reflections/specular_occlusion/enabled` or per shader with `render_mode specular_occlusion_disabled`. The `StandardMaterial3D` **Bent Normal** slot takes a baked bent normal map for better indirect lighting on hero assets.

> See [references/global-illumination.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/global-illumination.md#specular-occlusion-from-ambient-light-godot-45) for when each one matters and the bent normal setup.

---

## 6. Fog

Three layers: depth/height fog set on `WorldEnvironment.environment` (cheap, all renderers), volumetric fog (Forward+ only — godrays through depth), and `FogVolume` nodes for localized fog effects (interior rooms, pits, atmospheric volumes).

> See [references/fog-recipes.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/fog-recipes.md) for the full GDScript and C# recipes — depth/height fog setup, volumetric fog parameters and performance notes, and FogVolume placement.

> ⚠️ **Changed in Godot 4.7:** New project setting `rendering/environment/fog/use_legacy_blending` (default `false`) restores the volumetric fog blending of Godot 4.5 and earlier ([GH-119414](https://github.com/godotengine/godot/pull/119414); also on the 4.6 branch). The blending itself changed in **4.6**, which made it more physically accurate, so fog tuned on 4.5 looks brighter after upgrading ([GH-112494](https://github.com/godotengine/godot/pull/112494)). Enable the setting to get the old look back exactly; otherwise lower the fog density or the lights' Volumetric Fog Energy.

## 7. Decals

`Decal` nodes project a texture onto whatever surfaces fall within their bounding box — bullet holes, blood splatter, ground details, signage. Forward+ and Mobile render decals; Compatibility does not. Performance scales with overdraw and decal count.

> See [references/decals.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/decals.md) for the scene setup, runtime spawning recipe (GDScript + C#), and the per-renderer decal limits.

---

## 8. Optimization — LOD, Culling, MultiMesh

Four tools: automatic mesh LOD (set on import or per `MeshInstance3D`), manual `VisibilityRange` for staged swaps, occlusion culling via `OccluderInstance3D`, and `MultiMeshInstance3D` for thousands of identical meshes in one draw call.

> See [references/lod-and-culling.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/lod-and-culling.md) for setup recipes for each tool plus the MultiMesh runtime population example.

## 9. Renderer Comparison

Pick the renderer before you build the look: **Forward+** (desktop default) is the only one with SDFGI and volumetric fog, **Mobile** trades those for performance on tile-based GPUs, and **Compatibility** (GLES3-class) drops most advanced lighting entirely. Advice that assumes SDFGI silently fails on the other two.

Full feature-by-renderer table and selection guidance: [references/renderer-comparison.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/renderer-comparison.md)

---

## 10. Common Pitfalls

Quick symptom → cause → fix table covering black scenes, dark objects without ambient light, shadow acne and peter-panning, popping shadows, flat materials, invisible decals, transparency sorting artifacts, SDFGI light leaking, missing volumetric fog, and invisible MultiMesh instances.

> See [references/common-pitfalls.md](https://skilld.dev/api/skills-raw/jame581/godotprompter/3d-essentials/references/common-pitfalls.md) for the full table.

---

## 11. Implementation Checklist

- [ ] Scene has Camera3D, at least one light source, and WorldEnvironment
- [ ] Environment has a sky material (procedural or HDR panorama) for ambient and reflected light
- [ ] Tonemap mode is set (Filmic or ACES for realistic look, AgX (4.4+) for physically accurate)
- [ ] DirectionalLight3D has shadows enabled with `shadow_normal_bias` tuned to prevent acne
- [ ] `directional_shadow_max_distance` is set to the minimum needed (50–100m typical)
- [ ] Static geometry uses StandardMaterial3D with appropriate PBR textures (albedo, normal, roughness, metallic)
- [ ] Transparent materials use Alpha Scissor or Alpha Hash instead of Alpha where possible (performance + shadows)
- [ ] ReflectionProbes are placed in rooms/areas with reflective surfaces
- [ ] GI method chosen based on project needs (LightmapGI for static, SDFGI for large dynamic, VoxelGI for small dynamic)
- [ ] Mesh LOD is enabled on import (default for glTF/Blend — verify OBJ files)
- [ ] Occlusion culling is enabled and baked for scenes with heavy occlusion (indoor, urban)
- [ ] MultiMeshInstance3D is used for instanced geometry (grass, trees, props) instead of individual nodes
- [ ] Renderer matches target platform (Forward+ desktop, Mobile mobile, Compatibility web)
- [ ] Specular occlusion (on by default since Godot 4.5) is left enabled, or disabled deliberately via `rendering/reflections/specular_occlusion/enabled` where reflections look too dim
- [ ] Hero assets with complex surface detail use bent normal maps in the StandardMaterial3D Bent Normal slot for improved indirect lighting (Godot 4.5+)
- [ ] After upgrading to Godot 4.6, glow settings are re-tuned if appearance has changed (default blend mode is now Screen and glow is blended before tonemapping)
- [ ] AgX `tonemap_agx_white` and `tonemap_agx_contrast` are adjusted when using AgX tonemapper for precise look control (Godot 4.6+)
- [ ] After upgrading, volumetric fog (blending changed in 4.6; 4.7 adds `use_legacy_blending`) and sky reflections (`roughness_layers` differed in 4.6.0–4.6.1) are re-checked
