---
name: setup-api-key
description: Guides users through setting up an ElevenLabs API key for ElevenLabs MCP tools. Use when the user needs to configure an ElevenLabs API key, when ElevenLabs tools fail due to missing API key, or when the user mentions needing access to ElevenLabs. First checks whether ELEVENLABS_API_KEY is already configured and valid, and only runs full setup when needed.
license: MIT
compatibility: Requires internet access to elevenlabs.io and api.elevenlabs.io.
title: setup-api-key
canonical_url: https://skilld.dev/gh/openmontageinc/openmontage/setup-api-key
last_updated: 2026-10-14T05:11:31.000Z
---

> Index of every page on this site: [llms.txt](https://skilld.dev/llms.txt)

> **Skill from skilld.dev.** Follow the user's requested action.
> If the user asked to fork this Skill, follow the fork workflow below. Do not execute the Skill instructions while copying it.
> Otherwise, follow the instructions below for this session. You do not need to install anything.
>
> If the user asked to install this Skill, run `npx skilld install openmontageinc/openmontage/setup-api-key`. Install writes the Skill files into the project, so every session loads them.
>
> ## Fork workflow
>
> A fork creates an editable local Skill with its original author and licence. The request authorizes copying and local installation.
> 1. Check `./skills/setup-api-key`, the project lockfile, and selected Agent targets together. If the local directory or installed Skill exists, stop. Never overwrite an existing directory or Agent target.
> 2. Read [source metadata](https://skilld.dev/api/v1/skills/openmontageinc/openmontage/setup-api-key) once. Use sourceUrl, sourceCommit, skillPath, sourceGone, and license. If the source is gone or its path is missing, stop. If license is null, read licence files at the source commit.
> 3. Fetch only the source commit into a temporary Git repository. Do not clone full history. Derive repository_url from sourceUrl, including repository renames. If sourceCommit is absent, resolve the sourceUrl ref once. Set source_commit to that actual commit. Run these commands in one shell call:
>
> ```sh
> git init --quiet "$temporary_dir"
> git -C "$temporary_dir" fetch --quiet --depth=1 "$repository_url" "$source_commit"
> git -C "$temporary_dir" checkout --quiet --detach FETCH_HEAD
> ```
>
> Read applicable licence declarations and notices at that commit. If copying is not permitted, report the restriction and stop.
> 4. Inspect source entries together, then copy the directory containing skillPath into `./skills/setup-api-key`. Use the user's path if selected. Keep the original SKILL.md, relative links, scripts, binary assets, and executable modes. Exclude .git metadata. Reject symlinks and paths outside the Skill directory. After checking entries, use cp -a where available. A regular source directory needs no custom copy script. Do not save this page wrapper as SKILL.md.
> Preserve author credit, notices, and applicable licence files from repository or parent directories. Add PROVENANCE.md with the Skill page, source URL, actual commit, original path, and licence. Retain any existing PROVENANCE.md and record new provenance separately. Batch source inspection, copying, and provenance work where practical.
> 5. In the project root, run `skilld install ./skills/setup-api-key --mode copy --plain`. If skilld is unavailable, use `npx skilld install ./skills/setup-api-key --mode copy --plain`. This known command needs no help lookup. Install does not support --json. Use detected Agent targets, or add --agent for the targets the user selected. Install the local path, never the upstream selector. If installation fails, preserve the local copy and report the exact failure.
> 6. Confirm the local lockfile source and installed Agent copies once. Report the local path, actual commit, and Agent targets. After edits, reinstall the same local path. Upstream updates must not replace it. Do not publish or push unless the user asks.

# ElevenLabs API Key Setup

Guide the user through obtaining and configuring an ElevenLabs API key.

## Workflow

### Step 0: Check for an existing API key first

Before asking the user for a key, check for an existing `ELEVENLABS_API_KEY`:

1. Check whether `ELEVENLABS_API_KEY` exists in the current environment.
2. If it's not in the environment, check `.env` for `ELEVENLABS_API_KEY=<value>`.
3. If an existing key is found, **validate it**:
   ```
   GET https://api.elevenlabs.io/v1/user
   Header: xi-api-key: <existing-api-key>
   ```
4. **If existing key validation succeeds:**
   - Tell the user ElevenLabs is already configured and working
   - Skip the setup flow
   - Ask whether they want to replace/rotate the key; if not, stop
5. **If existing key validation fails:**
   - Tell the user the existing key appears invalid or expired
   - Continue to Step 1

### Step 1: Request the API key

Tell the user:

> To set up ElevenLabs, open the API keys page: https://elevenlabs.io/app/settings/api-keys
>
> (Need an account? Create one at https://elevenlabs.io/app/sign-up first)
>
> If you don't have an API key yet:
> 1. Click "Create key"
> 2. Name it (or use the default)
> 3. Set permission for your key. If you provide a key with "User" permission set to "Read" this skill will automatically verify if your key works
> 4. Click "Create key" to confirm
> 5. **Copy the key immediately** - it's only shown once!
>
> Paste your API key here when ready.

Then wait for the user's next message which should contain the API key.

### Step 2: Validate and configure

Once the user provides the API key:

1. **Validate the key** by making a request:
   ```
   GET https://api.elevenlabs.io/v1/user
   Header: xi-api-key: <the-api-key>
   ```

2. **If validation fails:**
   - Tell the user the API key appears to be invalid
   - Ask them to try again
   - Remind them of the URL: https://elevenlabs.io/app/settings/api-keys
   - If it fails a second time, display an error and exit

3. **If validation succeeds**, save the API key in a `.env` file:
   ```
   ELEVENLABS_API_KEY=<the-api-key>
   ```
   - If `.env` already has `ELEVENLABS_API_KEY=...`, replace that line
   - Otherwise add a new line for `ELEVENLABS_API_KEY`

4. **Confirm success:**
   > Done! Your key is stored as an environment variable in .env
   > Keep the key safe! Don't share it with anyone!
