3D-printing handoff
Choose the requested stage
Distinguish geometry for a print service, a configured slicer project, and an inspected slice. Establish the additive process and material only as needed for the next design decision. Printer/nozzle details may be controlled by a service; do not demand them for an honest geometry-only delivery.
For functional parts, account for orientation-dependent strength, fit, wall/feature realization, assembly, and postprocessing. Use source-backed process limits rather than universal clearances, support angles, or boss ratios. Select thread/insert/fastener geometry and installation method for the actual material and hardware; a modeled helix alone does not prove usable threads.
Validate geometry and representation
Verify explicit scale and units, transforms, orientation, intended components, bounds, and critical features against the authoritative source. STL lacks a dependable unit declaration; communicate intended units and verify the target import size. Check appropriate mesh topology: manifoldness/watertightness, self-intersections, degenerate triangles, orientation, disconnected shells, and intended unions or separations.
Inspect tessellation error at curves, small features, and mating surfaces. A dense mesh can still be wrong; a smooth render can hide coarse geometry. Preserve functional openings, clearances, wall/floor thickness, and feature coverage. Do not silently repair, fuse, hollow, or rescale accepted geometry.
A generic 3MF can contain geometry without a usable application-specific machine/material/process setup. Do not call it a configured project from its extension. Reopen it in the target application and verify the effective settings, including inherited overrides and object-level settings.
Verify the slice when requested
Use the actual target application/version and correct machine, nozzle where relevant, material, process, orientation, and placement. Slice the delivered project and inspect layer/toolpath previews for missing thin features, unintended filled holes, disconnected islands, unsupported starts, support contact/removal, trapped material, and intended separation between parts.
Assess process-specific escape, drainage, washing, curing, powder/support removal, and surface access where applicable. Avoid inaccessible support or sealed cavities that defeat postprocessing. Verify shrink/fit compensation is deliberate and applied only once. Estimated time/material are slicer estimates, not measured results.
If the target slicer/profile is unavailable, deliver checked geometry with that gate unverified rather than inventing settings or claiming print readiness. A passed slice still requires appropriate physical fit/strength/finish proof for its intended use. Do not start a print or control the machine without separate authorization.
Primary anchors
Check current relevant documentation when needed: 3MF core specification, Bambu Studio, and Prusa modeling guidance. Use the selected printer/material producer's requirements for actual production values.