Index of every page on this site: llms.txt
All skills
k-dense-ai avatar

/datalad

@ec59a29
Run it yourself

Retrieves, versions, and publishes scientific datasets with DataLad and git-annex, and captures computational provenance with datalad run, rerun, and containers-run. Use when cloning or fetching data from OpenNeuro, DANDI, datasets.datalad.org, or any DataLad dataset; when a file in a dataset reads as a broken symlink or a small pointer instead of real data; when an analysis needs a machine-readable record of how each output was produced so it can be re-executed; or when publishing a dataset to siblings such as a GitHub repository plus a storage remote. Also use to decide between DataLad and plain Git for a data-carrying repository.

Use this Skill: https://skilld.dev/gh/k-dense-ai/scientific-agent-skills/datalad

Nothing lands on disk. Nothing to clean up.

Fork this Skill

Edit a local copy. It keeps the author and licence.

referencespublishing.md

≈2.8k tokens on demand. Your agent reads this file only when SKILL.md points to it.

Siblings, publishing, and credentials

The two-target model

A DataLad dataset almost never publishes to one place. The Git history and the annexed content usually go to different targets, because Git hosting services will not store the data. The normal shape is a Git sibling plus a storage sibling, with a declared dependency between them.

Getting this wrong produces the most common broken publication: collaborators clone successfully, see every file listed, and then find every datalad get failing because the content was never uploaded anywhere reachable.

Managing siblings

datalad siblings [-h] [-d DATASET] [-s NAME] [--url [URL]] [--pushurl PUSHURL]
    [-D DESCRIPTION] [--fetch] [--as-common-datasrc NAME] [--publish-depends SIBLINGNAME]
    [--publish-by-default REFSPEC] [--annex-wanted EXPR] [--annex-required EXPR]
    [--annex-group EXPR] [--annex-groupwanted EXPR] [--inherit] [--no-annex-info]
    [-r] [-R LEVELS] [--version] [{query|add|remove|configure|enable}]

Five actions. query is the default and reports known siblings. add and configure are the same operation except that adding a sibling whose name already exists fails while reconfiguring does not. enable completes access for a git-annex special remote in a fresh clone. remove de-configures a sibling.

Options that carry real consequences:

  • --publish-depends SIBLINGNAME adds "a dependency such that the given existing sibling is always published prior to the new sibling". Set this on the Git sibling, naming the storage sibling, and the ordering problem stops being something anyone has to remember.
  • --annex-wanted EXPR sets a git-annex preferred-content expression for the sibling, for example standard combined with a group, or include=*.nii.gz. --annex-required makes content mandatory there rather than merely wanted.
  • --pushurl supplies a separate write URL when the read URL cannot be pushed to, the usual case for an HTTPS read path with an SSH write path.
  • --as-common-datasrc NAME configures a sibling "as a common data source of the dataset that can be automatically used by all consumers", which is how a public mirror becomes usable by anyone who clones without them configuring anything.
  • --inherit takes configuration from the superdataset's corresponding sibling, which matters when publishing a nested dataset hierarchy.

Creating siblings

Rather than configuring by hand, use the create-sibling-* family, which creates the remote side and configures the local side together:

Command Target
datalad create-sibling-github A GitHub repository
datalad create-sibling-gitlab A GitLab project
datalad create-sibling-gogs / -gin / -gitea GOGS, GIN, and Gitea instances
datalad create-sibling-ria A RIA store
datalad create-sibling A generic sibling over SSH

The create-sibling-* family covers Git siblings (a Git remote plus a hosting-service repository or project) and the RIA layout, which packages a Git remote and a matching git-annex special remote together. Storage-only targets — S3 buckets, WebDAV, plain SSH directories, rclone-reachable services — are git-annex special remotes rather than Git remotes, and they are created with git annex initremote rather than create-sibling-*. That distinction is what the two-target model turns on: the Git sibling carries history, the storage sibling carries content. RIA stores, GIN, and suitable filesystem/SSH Git-annex repositories can serve both from one infrastructure location.

GIN is worth knowing about in a neuroscience context because it hosts annexed content directly, which collapses the two-target model back into one target.

RIA stores

A RIA store is a flat, filesystem-level layout for holding many datasets, designed for cluster and institutional storage where per-dataset repositories are impractical. Clone URLs use a ria+ prefix and a fragment identifying the dataset:

datalad clone "ria+ssh://user@hostname/absolute/path/to/ria-store#DATASET-UUID"
datalad clone "ria+file://${HOME}/myriastore#~dl-101"

The fragment is either the full dataset ID or an alias prefixed with ~. Aliases exist because dataset IDs are UUIDs and nobody remembers them.

datalad create-sibling-ria -s ria-backup --alias dl-101 --new-store-ok \
  "ria+file://${HOME}/myriastore"
  • --new-store-ok permits creating the store when it does not already exist. Without it, pointing at a nonexistent path is an error rather than a silent creation.
  • --alias sets the friendly name used in the clone fragment.
  • --storage-sibling controls the git-annex special remote. off disables it, and only creates the special remote without the regular RIA sibling.
  • --shared sets multi-user permissions using the values git init --shared accepts.

By default the command creates both a regular sibling and a storage sibling named with a -storage suffix and sets their publication dependency. RIA HTTP(S) access is read-only; provide an SSH/file --push-url for writes. Quote RIA URLs so shell #, ~, and bracket interpretation cannot change them. Do not run ordinary git-annex commands directly inside a RIA store; access its special layout through the ORA remote.

Pushing

datalad push [-h] [-d DATASET] [--to SIBLING] [--since SINCE] [--data
    {anything|nothing|auto|auto-if-wanted}] [-f
    {all|gitpush|checkdatapresent}] [-r] [-R LEVELS] [-J NJOBS]
    [--version] [PATH ...]

--data controls annexed content transfer, and the default is auto-if-wanted:

Value Behaviour
anything Transfer selected current annexed content without preferred-content filtering
nothing Skip git annex copy entirely, publishing history only
auto Let wanted expressions and required copy counts select transfers
auto-if-wanted Default. Apply auto mode when wanted is configured; otherwise behave as anything

Without a wanted expression, the default does transfer selected content; it is not a history-only push. All modes are bounded by selected paths/current revision and local content availability. A push is not an archive of every historical key. If later get fails, inspect transfer results, missing local bytes, remote access, and wanted filters. A tiny directory-special-remote test verifies this default behavior.

--since SINCE limits what is considered, and --since '^' uses the last known state of the sibling's branch as the baseline. -f/--force accepts gitpush (override Git push safety), checkdatapresent (skip the git-annex copy optimisation and transfer regardless of what the remote is believed to hold), or all.

Illustrative authenticated first publication (creates GitHub/S3 resources; not run in this refresh). Use a bare repository name for the authenticated user; a prefix such as myorg/ means an organization, not a personal account:

datalad create-sibling-github mydataset
git annex initremote store type=S3 bucket=my-bucket protocol=https \
  encryption=none autoenable=true
datalad siblings configure -s github --publish-depends store
datalad push --to github --data anything -r

The Git sibling is created by datalad create-sibling-github, the storage sibling by git annex initremote; see the note under "Creating siblings" above for why the two are not the same tool. autoenable=true lets a fresh clone reach the storage sibling without a manual enableremote step when its other requirements are met. It does not grant bucket access. encryption=none disables git-annex encryption; it does not make an S3 bucket public. Configure access policy separately. For intended anonymous downloads, set the special remote's publicurl to the reachable bucket/object URL and verify it from an unauthenticated clone. Do not use the deprecated S3 public ACL option for modern buckets. Private access and encryption are separate choices.

Verify from the other side rather than trusting the push output:

datalad clone https://github.com/myaccount/mydataset.git /tmp/verify
datalad get -d /tmp/verify path/to/representative-file

Credentials

DataLad resolves credentials in a defined order and stores interactively entered secrets through the keyring package, using whichever backend that package finds on the system. Configuration (including environment overrides) is checked before keyring lookup; interactive prompting is a fallback. Review the active backend on headless hosts.

Three ways to supply them, in increasing order of automation:

  1. Interactive. DataLad prompts when a credential is needed and not available, and stores the answer in the active keyring backend.
  2. Local configuration. datalad.credential.<name>.<component> can supply a component, but keep secrets out of tracked .datalad/config and shared config files. Prefer a suitable keyring or process environment for credentials.
  3. Environment. "Variable names take the form of DATALAD_CREDENTIAL_<NAME>_<COMPONENT>, and standard replacement rules into configuration variable names apply." The transformation replaces __ with a hyphen, then _ with a dot, then lowercases. Keep credential names simple and free of underscores so this stays predictable.

Setting datalad.credentials.force-ask forces interactive re-entry, overriding a stored credential with a new value. That is the fix when a rotated key keeps failing because the old one is still cached.

For git-annex special remotes on a fresh clone, the credential is not enough on its own. The special remote also has to be enabled locally:

datalad siblings -d . enable -s store
# or, at the git-annex level
git annex enableremote store

A clone that reads Git history but cannot get content may have a disabled remote, missing credentials, an inaccessible URL, or unpublished content. Check git annex info and the transfer error to distinguish them. DataLad credentials do not automatically configure every git-annex backend: the S3 special remote reads AWS_ACCESS_KEY_ID, AWS_SECRET_ACCESS_KEY, and optionally AWS_SESSION_TOKEN during initialization or enabling. Keep embedcreds disabled unless its sharing/encryption behavior is intended.

Official contracts: push, GitHub sibling, RIA, S3 special remote, and credentials.

Never commit credentials into the dataset. The whole point of the dataset is that it gets published, and a secret in the history is published with it.

Source: SKILL.md on GitHub

skilld matched fixed text patterns in SKILL.md and file names. Patterns miss obfuscated code.

skilld run checks every file with the same patterns. It asks for approval before it loads a Skill with a behavior marked Needs approval.

No alerts17d3 checks · Risk SAFE
  • Gen Agent Trust Hub17d

    The skill provides a comprehensive interface for DataLad, a data management tool designed for scientific datasets. It supports dataset discovery, cloning from public repositories, large file management via git-annex, and automated provenance tracking by executing shell commands. All capabilities, including network access and command execution, are documented and essential to the skill's primary function.

  • Socket17d

    No alerts

  • Snyk17d

    Risk: LOW · No issues

Signed by skilld at ec59a29. This ties the file your Agent reads to that commit on GitHub. It does not review the instructions.

Last checked against GitHub 4 days ago.

Activeupdated 2 months ago
All 1 allowed tools
Read Write Edit Bash
Other metadata
compatibility
Requires Python 3.10+, DataLad 1.6.5, Git, and git-annex 10.x. Tested with git-annex 10.20260901 and datalad-container 1.2.6 on macOS ARM64. Containers additionally require Singularity, Apptainer, or Docker. Remote data access needs network access and may need provider credentials. Local filesystem workflows work offline.
metadata
{
  "version": "1.2",
  "last-reviewed": "2026-09-30",
  "skill-author": "Dylan Pulver"
}

README badge

README badge for k-dense-ai/scientific-agent-skills/datalad